Rapid label - winning bet by SER.TEC.

In recent months SER.TEC. General Printing and DPI were among the main protagonists of many events related to the field of screen and digital printing. From the Viscom regional Samuplast via the FESPA Digital in Hamburg and a number of open house throughout the country, our products have received increasing interest from the audience. In particular, considerable success has been reported from the Rapid Label Printers Line.

Rapid label, which is proving to be one of the winning bets SER.TEC., Is the printer that revolutionizes the digital label printing and digital printing same. Thanks to the Memjet technology, the Rapid X1 and X2 are able to provide full-color prints at low cost and impressive speed, up to 30 meters. per minute! Also, very importantly, the software allows the management of variable data.

Available in two models and Rapid Rapid X1 X2:

X1 is a rapid roll-to-roll printer with a capacity of winding / unwinding of 305mm - outer diameter, 5 color print head and 216 mm in width, optical sensor for pre-cut adhesive labels with a maximum resolution of 1600x1600 dpi .

The RapidX1 can print on continuous media without the use of references to the recording position. The maximum print speed is about 305 mm per second at 1600x800 dpi.

RapidX2 has a large diameter and carrying out a loop that allows the printer to operate in line with subsequent finishing processes.

As the RapidX2 oriented to an operating field more intense, in terms of media handling capabilities, is based on the same technology of the X1, but with a 650mm diameter roller load is roughly equivalent to 1500 meters.

Addition to the above Rapid Rapid X2 X1 and the big news that we're going to point out is the new Rapid Gold.

The Rapid Gold is a digital system with thermal MicroPiezo modular and hybrid technology to the finish with rolled foils of metallic nature, the development of the Rapid Gold allows its use in combination with the line of printers is a snap because software reading of the passage and mark registry, which allows it to overprint or print in register on pre-printed labels with Rapid.

The management software also interfaces with our WhiteRip Label Edition, automatically creating the correct file to print a single setting. Its speed is 6 m / minute, the light is useful for the model of 110 mm and 150 mm Rapid Gold 1 to Gold 2 Rapid model.

The WhiteRip Label Edition is a printing software created by

EV Network, with a simple and intuitive interface, based on new technologies that enhance print quality and maximize production.

Among its features are managing variable data, the ability to interface with different management, and to create barcode QRcode is also able to perform the optimization calculation of the space.

If you would like more information about the world views of the Rapid label www.rapidlabel.it visit the website immediately, you will have the opportunity to learn in more detail and specific characteristics of this innovative and sophisticated line of printers. Please note that all the products in the Rapid and label information on our software you can find in our WhiteRip official website www.ser-tec.org